Mounting Bar for Power Watchdog EPO (GEN I Only)
Bracket to mount a Gen I EPO Power Watchdog in your RV
Works on any Gen I “EPO – emergency power off” type Power Watchdog
(PWD30-EPO, PWD50-EPO, PWD30-EPO-H, PWD50-EPO-H) *Not for PWD30, PWD50 or GEN II (WiFi) models
Easy 5 min installation with simple tools
Comes with two metal bars and eight screws.
Allows you to securely and neatly mount the unit to a wall or bulkhead.
Allows a portable EPO unit to be installed inside the RV.
INSTRUCTIONS
Attach the metal bars to the backside of the Power Watchdog EPO unit, one on the top and one on the bottom
Align the bracket holes over the screw holes of the Power Watchdog
Use the 4 smaller machine bolts to secure the brackets to the PWD-EPO unit. Do not over tighten.
Locate inside your compartment/bulkhead where do you want to install the Power Watchdog EPO and mark the holes with a pen/pencil.
Use the 4 bigger screws to attach the brackets to your desired location. Do not over tighten.
Make sure it is secure and you’re done.
Bracket to mount a Gen I EPO Power Watchdog in your RV
Works on any Gen I “EPO – emergency power off” type Power Watchdog
(PWD30-EPO, PWD50-EPO, PWD30-EPO-H, PWD50-EPO-H) *Not for PWD30, PWD50 or GEN II (WiFi) models
Easy 5 min installation with simple tools
Comes with two metal bars and eight screws.
Allows you to securely and neatly mount the unit to a wall or bulkhead.
Allows a portable EPO unit to be installed inside the RV.
INSTRUCTIONS
Attach the metal bars to the backside of the Power Watchdog EPO unit, one on the top and one on the bottom
Align the bracket holes over the screw holes of the Power Watchdog
Use the 4 smaller machine bolts to secure the brackets to the PWD-EPO unit. Do not over tighten.
Locate inside your compartment/bulkhead where do you want to install the Power Watchdog EPO and mark the holes with a pen/pencil.
Use the 4 bigger screws to attach the brackets to your desired location. Do not over tighten.
Make sure it is secure and you’re done.
Bracket to mount a Gen I EPO Power Watchdog in your RV
Works on any Gen I “EPO – emergency power off” type Power Watchdog
(PWD30-EPO, PWD50-EPO, PWD30-EPO-H, PWD50-EPO-H) *Not for PWD30, PWD50 or GEN II (WiFi) models
Easy 5 min installation with simple tools
Comes with two metal bars and eight screws.
Allows you to securely and neatly mount the unit to a wall or bulkhead.
Allows a portable EPO unit to be installed inside the RV.
INSTRUCTIONS
Attach the metal bars to the backside of the Power Watchdog EPO unit, one on the top and one on the bottom
Align the bracket holes over the screw holes of the Power Watchdog
Use the 4 smaller machine bolts to secure the brackets to the PWD-EPO unit. Do not over tighten.
Locate inside your compartment/bulkhead where do you want to install the Power Watchdog EPO and mark the holes with a pen/pencil.
Use the 4 bigger screws to attach the brackets to your desired location. Do not over tighten.
Make sure it is secure and you’re done.